Odoo IoT Box Static IP Setup

1. Access the IoT Box Webpage:
   • Go to the IoT Box webpage and enable remote debugging.
   • Generate a password for secure access.
2. Connect to the IoT Box via SSH:
   • Open an SSH connection to the IoT Box using:

     ssh pi@<ip_address>
     

   • Use the password generated in the previous step.
3. Enable Write Mode on the Filesystem:
   • By default, the Odoo filesystem is mounted in read-only mode. To make changes, switch to write mode using the following commands:

     sudo mount -o rw,remount / && sudo mount -o remount,rw /root_bypass_ramdisks
     

4. Edit Network Configuration for Persistent Settings:
   • Open the network configuration file for editing:

     nano /root_bypass_ramdisks/etc/dhcpcd.conf
     

   • Add the necessary network settings to the file. For example:

     interface eth0
     static ip_address=192.168.1.100/24  # Replace with the desired IP
     static routers=192.168.1.1          # Replace with your gateway
     static domain_name_servers=8.8.8.8  # You can add more DNS if needed
     

   • Note: Ensure you’re editing the file in /root_bypass_ramdisks/etc/ to make the changes permanent.
5. Reboot the IoT Box:
   • Use the reboot option in the IoT Box webpage interface to apply the changes.